C1723E

POWER TRAIN

• Engine: 22.5 Gross HP 3 Cyl Diesel 68.5 CID (1.1 L), 18.3 PTO HP @ 2600 RPM
• Dry Type Single Air Cleaner
• Transmission: 2 Range Hydrostatic with Cruise Control
• Wet Disk Brakes
• Parking Brake
• Differential Lock
• PTO: 540 RPM Independent PTO 2000 RPM Mid Independent PTO

HYDRAULIC SYSTEM

• 3-Point Hitch, Cat I With Directional Control,
• Auto Return Lever System
• Engine Driven Gear Pump
• 3-Point Hitch 4.3 GPM (15.5 LPM)
• Power Steering 2.0 GPM (7.5 LPM)
• Total Combined Flow 6.3 GPM (23.1 LPM)

INSTRUMENTS

• Tachometer / Hourmeter
• Engine Coolant Gauge Fuel Gauge
• Warning Lights: Electrical Charging, Oil Pressure and Water Temperature

OTHER STANDARD FEATURES

• Hydrostatic Power Steering
• Tilt Steering Column
• Hand Accelerator
• Forward and Reverse Foot Pedal
• Covered Storage Compartment
• Electric Fuel Shut-Off
• 12 Volt Electrical System
• Battery: 390 Cold Cranking Amps
• Fully Adjustable Seat With Retractable Seatbelt
• Tilt-Up Hood
• Turn Signals, Flashers, Tail Lights

MF BH2720 BACKHOE
• Digging Depth: 76 inches
• Max Reach: 107 inches
• Transport Height: 71 inches
• Stabilizer Spread – Transport: 51 inches
• Stabilizer Spread – Operating: 81 inches
• Loading Height: 66 inches
• Angle of Departure: 22 Degrees
• Swing Arc: 150 Degrees
• Bucket Rotation: 177 Degrees
• Shipping Weight: 573 lbs
• Digging Force Using Bucket Cylinder: 2184 lbs
• Digging Force Using Dip per Cylinder: 1541 lbs
• Single Boom Swing Cylinder

MF FL1805 LOADER
• One Piece Main Frame with Tapered Arms and Single Cross Member
• Quick Attach Loader Frame Mount with Pin Lock
• Built-in Parking Stands
• (2) 1.57 inch Double Acting Lift Cylinders
• (2) 1.57 inch Double Acting Bucket Cylinders
• Simultaneous Operation of Lift/Lower and Curl/Dump Functions
• Hydraulic Lines Routed Inside Main Frame for Protection and Visibility
• Galvanized Pins with Recessed Grease Points
• 48-inch Standard Duty Skid Steer Bucket
• Grille Guard Standard
• Maximum Lift Height at Pivot Pins: 74 Inches
• Lift Capacity to Full Height at Pivot Pins: 922 lbs
• Break-out Force at Pivot Pins: 1,392 lbs
• Rated Hydraulic Pressure: 1,920 PSI
• Fits all GC1700 Series Tractors