TERRADISC T Trailed foldable short disc harrow
TERRADISC T harrows are transported on a dedicated chassis. A uniform and level finish is achieved for both shallow as well as deep tillage. The solid forged carrier arms are welded to a very wide clamping bracket. This ensures that the discs always retain their position and angle. Even in heavy soil it is impossible for them to deviate to the side - hard wheel tracks are broken up consistently.
- The rugged scalloped made of special heat-treated steel have a diameter of 580 mm
- Eight discs per meter of working width equate to a spacing of just 12.5 cm
- Low draft, perfect penetration, the best tilth and mixing effect, even in dry soil
- Maximum uptime and durability
- Tough and reliable
- 40 mm thick rubber elements provide proven, maintenance-free nonstop trip leg action
- The rear rollers assume the role of depth control for the disc harrow
- Working depth is adjusted hydraulically and quickly without risk to the operator
- Weight of the roller is transferred to the disc harrow during operation
- Folding 5 mm thick swing clips are used to fine-tune depth control
- The levelling tines are adjusted in unison with the roller mounting arms, no complicated manual intervention required
- The outer disc pairs are folded upwards hydraulically for transport on the road
- The edging board is simply pushed inwards for transport width of 3.0 m, 3.50 m and 4 m
- The optional sprig steel levelling tines deflect the flow of soil tp the rear roller, crumbling and levelling the ejected mixture of trash and soil
- The height of the levelling tines are adjusted when the rear roller is changed
- Position of the levelling tines change in accordance with the working depth
- The deeper the setting the easier the flow of material to the rear
- The drawbar is connected to the lower linkage and top link lugs
- Optimum ground clearance at headlands and during transport can be adjusted precisely to each tractor
- A front board is available as an option to level the soil in front of the discs
- The wheel chassis is mounted directly to the main frame and linked to the headstock
- The transport chassis ensures that the weight acting on the hitch and rear axle of the tractor is minimized
- At the headland the TERRADISC T is raised onto the rear roller and its weight is distributed across the whole working width
- TEGOSEM cover crop sowing unit
- Seed material is distributed pneumatically using distribution plates
- Roller options - Cage roller, double cage roller, knife ring roller, pack ring roller, rotopack roller, rubber packer roller, CONOROLL roller, tandem CONOROLL roller
- Standard equipment and controls - Metering shaft control and monitoring, output rate electronically adjustable, display in kg/ha, priming function, headland management, automatic calibration, total hectare counter and daily hectare counter, calibration button, emptying function to drain seed hopper, filling level sensor, DGPS sensor for speed sensor, pressure supervisor on hydraulically driven blower for trailed machines, sensors on top link or chassis for start/stop metering, safe access using platform, one rough seed and one fine seed metering wheel are supplied with drill as standard
